Purpose and Construction
This product is suitable for 75 series light steel keel independent partition wall vibration reduction

Structure and Composition
1. The structure consists of a metal insert as the framework, encased in a layer of vibration-damping rubber.
2. The load-bearing surface of the vibration-damping rubber features a double-stage vibration-damping structure with grooved teeth, whilst the centre of the underside is fitted with an elongated mounting hole to facilitate installation and adjustment.

Features
1. The load-bearing surface of the vibration-damping rubber features a double-stage vibration-damping structure with grooved teeth. Under light loads, the first-stage rack bears the load; the load-bearing area is small and the compressive stiffness is low.
Under heavier loads, both the first- and second-stage racks share the load; the load-bearing area is large and the compressive stiffness is high.

2. The teeth are elongated and oriented parallel to the wall surface; their stiffness perpendicular to the wall is low, providing effective low-frequency vibration damping.

3. The use of perforated metal plates as the framework reduces the need for metal component processing and adhesive application.

Main Technical Parameters
The following parameters are typical values for this series of products but not guaranteed values. The test values corresponding to specific models and specifications of products may be different.